Reading still an important business practice
Electronic communications can be overwhelming, but taking the time to read them is a must. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-05-15 CTE source:…
General Manufacturing Discussion
Recent discussions
Automated inspection takes flight
The next generation of in-line inspection instrumentation is in development for aerospace and other industries. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-04-15 CTE source:…
Math matters: CMM Inspection
Technology has not removed the need to master calculations. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-04-15 CTE source: https://ctemag.com/articles/math-matters/ Legacy path: /articles/math-matters
Get the most out of tried-and-true machinist vises
A little tender, loving care, and creative thinking will keep your vice in tip-top shape.n Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-04-15 CTE source:…
Cool cost cutting: Safety, Standards & Compliance
New nesting software and a post-processor reduce programming time and material consumption at I-Cherng Refrigerationn Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-04-15 CTE source:…
Specialized tools help deburr cross-holes
Automated deburring makes the process more efficient, giving the end product a more consistent finish from part to part. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on…
Machining large parts takes specialized mindset
Shops make big moves becoming specialists when manufacturing hefty parts. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-04-15 CTE source: https://ctemag.com/articles/machining-large-parts-takes-specialized-mindset/ Legacy path: /articles/machining-large-parts-takes-specialized-mindset
Hot diamonds and barber pole
The Grinding Doc addresses the cause of barber pole lines in workpieces. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-04-15 CTE source: https://ctemag.com/articles/hot-diamonds-and-barber-pole/ Legacy path:…
Simulating on-machine probing
CAMplete TruePath suite adds software to aid on-machining probing automation. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-04-15 CTE source: https://ctemag.com/articles/simulating-machine-probing/ Legacy path: /articles/simulating-machine-probing
Emag modernizes maintenance
The German machine tool manufacturer is working on a more automated version of its wear analysis system to put customers in complete control. Imported from the CTE archive to seed discussion on…
Market your shop through the slow down
Manager's Desk: The time to sell your operation like never before is when things slow down and new work is a must. Imported from the CTE archive to seed discussion on MFGAxis.…
Technology has made hard milling more feasible
Machine shop builds database of know-how, perfecting its hard milling techniques along the way. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source: https://ctemag.com/articles/technology-has-made-hard-milling-more-feasible/…
Microfinishing shifts gears: Testing & Quality Assurance
Microfinishing can make a high-quality gear even better by reducing surface roughness. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source: https://ctemag.com/articles/microfinishing-shifts-gears/ Legacy path:…
Sizing up anodizing: Testing & Quality Assurance
Anodizing is an economical approach to resolving surface finishing challenges. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source: https://ctemag.com/articles/sizing-anodizing/ Legacy path: /articles/sizing-anodizing
Machine shop tests Y-axis parting
Sandvik's CoroCut QD helps shop increase parting rates without sacrificing tool life, part quality Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source: https://ctemag.com/articles/machine-shop-tests-y-axis-parting/…
Surface roughness measurement can be challenging
L.S. Starrett's precision tool education manager offers the latest trends and developments in surface roughness measurement. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE…
CMMs automate part measurement
Paired with machine tools in a manufacturing cell, a coordinate measuring machine can collect, process and transmit data. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE:…
KRC Machine Tool rebrands and rebuilds
Remanufacturing a machine tool can make it perform better than when it was initially built. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source:…
Moldmaker pioneers use of femtosecond laser technology
Rhode Island shop applies latest technology to increase productivity. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source: https://ctemag.com/articles/moldmaker-pioneers-use-femtosecond-laser-technology/ Legacy path: /articles/moldmaker-pioneers-use-femtosecond-laser-technology
How your shop looks makes all the difference
Machinist's Corner: Michael Deren wants you to take a good look at your shop's appearance. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source:…
Sculptor finds the art in machining
Using handmade tools and automated machines, Baltimore-based artist Chris Bathgate crafts precise elements that assemble into complex sculptures. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE:…
5G technology on the shop floor
Machine Technology: Companies partner to create an extremely fast-acting process monitoring system. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15 CTE source: https://ctemag.com/articles/5g-technology-shop-floor/ Legacy path:…
Managing from a distance: People & Companies
Manager's Desk: Machine shops are often small businesses where balancing the professional and personal can be difficult. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-03-15…
With MQL, the advantages are clear
Minimum quantity lubricationimproves productivity and tool life. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-02-15 CTE source: https://ctemag.com/articles/mql-advantages-are-clear/ Legacy path: /articles/mql-advantages-are-clear
Quick-change act: Tool Presetting
Camcraft added a flexible manufacturing system to enhance the spindle utilization of its horizontal machining centers. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2019-02-15 CTE…