Video: Vargus LIVE from MT Series West
Source article: https://mfgaxis.com/videos/vargus-live-from-mt-series-west/ Company: Cutting Tool Engineering
Video Showcase & Demos
Recent discussions
Video: LANG Technik and Metalcraft Automation LIVE from MT Series West
Source article: https://mfgaxis.com/videos/lang-technik-and-metalcraft-automation-live-from-mt-series-west/ Company: Cutting Tool Engineering
Video: Mate Precision Technologies LIVE from MT Series West
Source article: https://mfgaxis.com/videos/mate-precision-technologies-live-from-mt-series-west/ Company: Cutting Tool Engineering
Video: Castrol LIVE from MT Series West
Source article: https://mfgaxis.com/videos/castrol-live-from-mt-series-west/ Company: Cutting Tool Engineering
Video: E-Peak
Source article: https://mfgaxis.com/videos/e-peak/ Company: Cutting Tool Engineering
Video: Gudel at FABTECH 2025
From moving cobots to novel mobile automation solutions, Güdel Inc. highlighted two new technologies at FABTECH 2025. The equipment included the CoboMover, a 7th-axis linear track purpose-built for collaborative and lightweight robots.……
Video: OLIS at FABTECH 2025
Keeping a machine running can be a challenge. An expensive challenge. At Fabtech, Olis Robotics, specialists in remote control and error recovery systems for industrial robots, partnered with Mid-Atlantic Machinery to monitor……
Video: Hypertherm at FABTECH 2025
From its next generation of water jets, the OMAX Maxiem 1530X, to its latest plasma jet cutter, the XPR460 mechanized plasma cutter, Jake Brown, Executive Vice President of Global Sales and Marketing,……
Video: Mazak at FABTECH 2025
As a pioneer in friction stir welding (FSW) technology, Mazak MegaStir showcased its patented high-speed Instrumented Tool Holder (ITH) for friction stir welding (FSW) during Fabtech 2025. Mazak MegaStir takes the process……
Video: OMAX at FABTECH 2025
Steve Ulmer, director of sales for OMAX Corp., provided Cutting Tool Engineering with a look at two of OMAX’s latest generations of equipment during September’s Fabtech show. The machines included the new……
Video: MILLING A PUMP SHAFT with 100% VARGUS TOOLS
In this episode, Will and Aaron walk through the milling operations for the pump shaft. Listen to them talk about this episode on the latest episode of Bourbon With The Editor®: https://open.spotify.com/episode/5mANCRPNdulmIK9o51e3Lc?si=Ah9VKkZYSD2Tq_m3j2Fkzg…
Video: New QUICK3CHAM Heads for Boring and Enlarging Existing Holes
When surface finish, diameter, straightness, or roundness requirements are closer than traditional drilling operations can produce, it may be necessary to add a drill, endmill or single-point boring tool to the operation,……
Video: Turn with Confidence with Tungaloy’s Non-Ferrous Application Series
Achieve next-level precision in your turning applications with Tungaloy’s Non-Ferrous Application Series. Engineered with ultra-fine-grained PCD-tipped inserts, this series delivers unmatched edge sharpness, exceptional wear resistance, and flawless surface finishes even at……
Video: Small-Town Manufacturer Powers Oil & Gas by Cutting Cycle Times with Tungaloy-NTK
Precision is everything when it comes to manufacturing for the Oil and Gas industry. Gavin Schmitz and John Whitmore from WellHead Systems Inc. (WSI) take us behind the scenes on how their……
Video: Bourbon With The Editor® — The Precision Behind Scientific Cutting Tools
A family-built legacy powering modern machining. In this episode, Scientific Cutting Tools walks through the roots of their craft, the culture that keeps their quality consistent, and the technologies—Zoller, ANCA EPX, and……
Video: ERT 1
Source article: https://mfgaxis.com/videos/ert-1/ Company: Cutting Tool Engineering
Video: The Daily Grind #2 — AutoDesk vs. SolidWorks
On today's episode, I will be discussing the age-old debate between AutoDesk and SolidWorks. Featuring investigative results on the opinions of various professionals who use these products. Start your week with The Daily……
Video: The Daily Grind #3 — Leading By Example
On today's episode, I have my first guest! We will be discussing some ways in which engineers and the shop personnel can better work together and repair the communications breakdown between the……
Video: Interview with Doc Helm.
I sit down with Dr. Jeff Helm, Ph.D., Associate Professor of Mechanical Engineering at Lafayette College. We discuss, as an extension of today's live show, the best ways to lead by example……
Video: MakerSpace chat.
Source article: https://mfgaxis.com/videos/makerspace-chat/ Company: Cutting Tool Engineering
Video: Expand Your Options with SCT Single Point Tools
Expand Your Options with SCT Single Point Tools >> https://sct-usa.com/ Source article: https://mfgaxis.com/videos/expand-your-options-with-sct-single-point-tools/ Company: Cutting Tool Engineering
Video: The Daily Grind – Episode 4: Learning from the Past
On today's episode, Dr. Rohan Prabhu Ph.D, Assistant Professor of Mechanical Engineering at Lafayette College joins the show to discuss iterative design and the "Graveyard of Ideas". We also talk shop about……
Video: Iscar Quick-D-Mill: One tool, Multiple Functions, Maximum Efficiency.
Iscar’s Quick-D-Mill combines the functions of Drilling and Milling into one cutter for Maximum Machining Efficiency. Available in .625”, .750”, 1” and 1.250” diameters. This advanced cutter uses a versatile insert design……
Video: The Daily Grind – Episode 7: “Your future shop just called… It is profitable!!!”
On today's episode we are joined by Dave Winslow of Elite Manufacturing Advisory to talk "Industry 4.0", and what that may mean for your shop. We also as a lead-in to next……
Video: The Daily Grind – Episode 6: Preventative Maintenance is No Issue
On today's episode we are joined by Chris Tate, General Manager of Browning Oil Tools to talk preventative maintenance routines and to discuss an interesting and pivotal opinion that plagues some shops.…