Vendor Profile
HORN USA Inc.
Top quality always comes from the combination of the optimum machining process and the perfect tool. To achieve this, HORN combines cutting-edge technology, performance and reliability.
Top quality always comes from the combination of the optimum machining process and the perfect tool. To achieve this, HORN combines cutting-edge technology, performance and reliability.
Location & Contact
Related editorial coverage
Articles, videos, news, and products surfaced when relevant to this supplier.
Source: CTE
-
The carbide grade SG66 is available for all common Horn insert systems. The in-house coating also enables a short delivery time for…
-
German partners unveil a trio of major implant-machining advances.n
-
Due to their geometry and good chip breaking, the milling tools are suitable for machining numerous other materials. Due to the precise…
-
The insert of the Supermini Type 105 system requires only one tool holder for well over 1,000 insert variants. This applies equally…
-
The SG3P carbide grade also enables shorter cycle times for thread production thanks to higher cutting values, including when processing materials that…
-
IG3 when compared to previous generation offerings sets the new benchmark for tool life and machine time efficiency. IG3 offers similar performance…
-
Sustainability is a central component of Paul Horn GmbH`s corporate philosophy. Quality assurance, environmental protection, energy efficiency and safety have always been…
-
Horn USA's Adrian Noonan, technical specialist, tours kiosk after kiosk at the Horn booth during Eastec 2023, highlighting the newest innovations for…
-
Especially for milling aluminium alloys and plastics, Horn offers the indexable inserts with polished rake faces on all four edges from stock…
-
The exact adjustment of the damper, made of a carbide rod supported in O-rings, is made from the outside via an adjustment…
-
The nine-edged milling systems M911, M913 and M928 are stocked in cutting widths from 1.5 mm (0.059") to 3 mm (0.118") as…
-
The modular system has a selection of tool holders for turrets and other tool carrier interfaces based on common machine types. The…
-
Horn has revised the clamping of the S224 type indexable insert for use in Swiss-type lathes. In order not to have to…
-
As with other tool systems, high-performance reaming systems are also subject to demanding requirements. In addition to high process reliability, long tool…
-
The geometry is available as a standard tool for the 224, 229, S34T, 315, and 64T systems for precision machining of external…
-
The DDHM system is aimed primarily at customers in the tool and die-making industries. The focus is on machining carbide punches and…
-
Continuous development of customer-focused tool solutions is the idea behind the growth of Paul Horn GmbH, suppliers of cutting tools for manufacturers…
-
The stable cutting edge enables feed rates in the range of f = 0.25-0.4 mm/rev, during grooving and parting-off, which results in…
-
May 5, 2020 — In the midst of the corona crisis, in between restrictions on movement and contact, a key word that…
-
Without a doubt, cutting tools for machining titanium must be well-engineered. This was reinforced for CTE Editor Alan Richter while attending Horn…
-
Opinions vary on the definition of hard turning. Some industry experts say it's the single-edge cutting of hardened steels from 58 to…
-
With the right tools, threadmilling large bore diameters doesn't have to be daunting. Read the article and check out a brief video…
