Vendor Profile
Kurt Mfg. Co., Industrial Products Div.
The newly updated Kurt HD690CS vise features patented CARVESMART™ jaws preinstalled for optimal jaw flexibility, accuracy, and changeover speeds.
The newly updated Kurt HD690CS vise features patented CARVESMART™ jaws preinstalled for optimal jaw flexibility, accuracy, and changeover speeds.
Location & Contact
Related editorial coverage
Articles, videos, news, and products surfaced when relevant to this supplier.
Source: CTE
-
TriLock vises with CARVESMART jaws are on sale now with preinstalled hard jaws and a set of 6" extruded machinable aluminum jaws.…
-
Kurt DXH vises have a premium one-piece body design now standard on all Kurt general-purpose vises. Designed using Finite Element Analysis, the…
-
The compact Kurt RV24 Gripper comes standard with integrated electronics featuring sensors that ensure fingers and parts are in place and ready…
-
DX8, DX6 and DX4 vises were designed using Finite Element Analysis—providing 30% less horizontal push-back deflection than previous DX models. Less vise-body…
-
Loaded with features, the compact Kurt RV36 Gripper comes standard with integrated electronics featuring sensors that ensure fingers and parts are in…
-
Kurt's PF 420, PF 440 and PF 460 vises come with standard 4-inch jaw width and jaw openings ranging from 2.625" to…
-
The Kurt pyramid workholding bundles facilitate clamping of three individual components in one fixture and completed in a single setup. The Kurt…
-
Machine shops looking to utilize tombstone workholding fixtures on their horizontal machining centers should know about the economical and convenient way of…
-
Kurt gaging systems can provide 100% production inspection with fast cycle time and are critical to manufacturers of machined components. The gaging…
-
The new Kurt Pyramid workholding platform is designed to attach three Kurt vises for 5-axis machining multiple parts in one load. The…
-
When an equipment manufacturer wanted to automate part clamping for a high-volume casting to be machined in a robot attended machining cell…
-
A little tender, loving care, and creative thinking will keep your vice in tip-top shape.n
-
The Kurt newly designed rotary table workholding system is designed using the Kurt DX6 CrossOver hydraulic vise with a trunnion mounted onto…
-
Kurt DoveLock master jaws are designed to be installed in replacement of standard cap screw jaws and create a quick-change capability. Once…
-
Kurt's new line of motorized air vises utilize air-powered motors to provide consistent preset clamping force and programmable vise opening if desired.…
-
Kurt has launched the DX4 CrossOver Vise, a reduced size version of its successful DX6 CrossOver vise. Similarly designed to provide workholding…
-
Kurt's new pneumatic zero-point clamping system runs on existing shop air readily available in every machine shop. The Kurt DockLock Airline system…
-
Kurt's new KHU6 hydraulic unit comes ready with both single- and double-acting capabilities providing a convenient option to the users preferred clamping…
-
Using Finite Element Analysis (FEA), Kurt designed and optimized the new XL6 XtraLong vise to be better performing than its predecessor vise…
-
The Kurt MiniLock is a small, low-profile screw down clamp that provides a cost-effective, easy-to-use option for rigidly clamping components on machine…
-
High density, high accuracy and flexibility to accommodate different part sizes or multiple parts are benefits of Kurt's SeraLock Towers, and WedgeLock…
-
The Kurt DX6 Crossover vise design features are reportedly proven to help machinists enhance their ability to machine parts better and increase…
-
Kurt Workholding offers a complete line of high-density CarvLock workholding towers for precision machining with eight or 12 clamping stations in both…
-
Kurt's new KHP3 hydraulic pump is powered by normal shop air versus an electric motor. The pump uses 30 to 100 psi…
-
SideWinder vises mount directly to the back of 6- or 8-inch Kurt vises and make an ideal setup when configured in tandem…
-
Kurt's DoveLock dovetail vises are ideal for clamping strength and specifically designed for allowing access to five sides of the workpiece in…
-
Small to large part workholding setups reportedly align and lock into position fast and accurately using Kurt's DockLock system. The DockLock system…
-
Up to 28.5 inch jaw opening and 12,000 lbs. of clamping force makes Kurt's XL 8-inch vises ideal for the largest tool…
-
Kurt ToolBlox feature an open-cage design weighing 30 percent less than a solid tombstone with aluminum subplates, making easier handling for the…
-
The Kurt SideWinder vise provides vertical workholding without interfering with an existing host vise or the spindle. SideWinder vise expands the capabilities…
-
Your shop just bought its first 5-axis machining center. Now what? Not only are there new and more complex programming techniques to…
-
Kurt's line up provides machinists with a wide array of holding options for their workpieces being machined on small CNC tables.
-
Kurt's VersatileLock Vises provide clamping repeatability, assuring 0.0005 inch repeating accuracy.
-
Kurt's HD and HDL Vises maximize workholding productivity.
-
Shops looking to maximize workholding flexibility will reportedly get it with these Kurt VersatileLock tombstone fixtures.
-
Kurt Workholding introduces new 6-inch Steel DoveLock Quick-Change Jaw System for Kurt industry standard 6-inch vises and towers, following the successful introduction…
-
Kurt's new DoveLock vise is a 5-axis workholder for the most advanced aggressive machining operations.
-
Kurt Workholding introduces two new DoveLock Quick-Change Jaw System sizes for 4 inch and 8 inch Kurt industry standard vises and towers.
-
Kurt announces introduction of its new model KTR35 toolroom vise.
-
Kurt introduces new 8-inch VersatileLock vises available in manual, reverse and hydraulic versions.
-
Kurt's 3-In-One Jaw System is a fast and easy way to set vise jaws at any of these seven popular angles: 5,…
-
Kurt Workholding HD690 vise is a pull-type vise with a 9-inch jaw opening for clamping larger parts with minimal stationary jaw deflection.
-
New machining projects and ones requiring improved throughput can benefit from a custom engineered workholding system from Kurt Manufacturing Co.
-
Small to large part workholding setups align and lock into position fast and accurately using Kurt Manufacturing Co.'s DockLock system.
-
Five-axis machining varies from very small to extremely large and requires the right workholding to obtain optimal machining results and no single…
-
Machining center utilization improves significantly using the new Kurt PinLock system. It enables machining of multiple parts per load while reducing setup…
-
A hand-operated Pneumatic/Hydraulic Pump has been introduced by Kurt Workholding for use with its hydraulic vises, cluster towers and swing clamps.
-
Kurt announces the expansion of its 5-axis vise offering with the addition of two new MaxLock models.
-
Quickly align and setup any part on any horizontal and vertical machining center with Kurt's DockLock zero-point workholding system.
-
Kurt Manufacturing Co.'s D688 vise has an 8.8-inch jaw opening and repeatability to within 0.001 inch.
