Manufacturing Social & Supplier Network Follow posts, videos, discussions, and supplier signals.

Video Showcase

Wind Power Parts

Presented here is avideo of a SideLok long-edge milling cutter from Valenite LLC, Madison Heights, Mich.,machining Ti6Al4V at a cutting speed of 150 sfm, a feed rate of 4.5 ipm, a WOCof 0.375" and a DOC of 1.5" on a 30-hp HaasV65 CNC mill. The key technology of the SideLok systemis the co-location of the fastening system in the normally unused chip gullet space.

Source Attribution

Source: Cutting Tool Engineering

MFGAxis keeps this page focused on the manufacturing discussion layer. Source material should stay attributed, linked when a suitable source URL is available, and limited to excerpt or summary on MFGAxis.

Presented here is avideo of a SideLok long-edge milling cutter from Valenite LLC, Madison Heights, Mich.,machining Ti6Al4V at a cutting speed of 150 sfm, a feed rate of 4.5 ipm, a WOCof 0.375" and a DOC of 1.5" on a 30-hp HaasV65 CNC mill. The key technology of the SideLok systemis the co-location of the fastening system in the normally unused chip gullet space.

Open Source Discuss This On MFGAxis Source Correction

Discussion

Discuss this on MFGAxis

Read replies tied to this source content and add manufacturing context without duplicating the original article, video, or release.

0 replies 0 voices
MFGAxis Team April 12, 2026
Member

Presented here is avideo of a SideLok long-edge milling cutter from Valenite LLC, Madison Heights, Mich.,machining Ti6Al4V at a cutting speed of 150 sfm, a feed rate of 4.5 ipm, a WOCof 0.375" and a DOC of 1.5" on a 30-hp HaasV65 CNC mill. The key technology of the SideLok systemis the co-location of the fastening system in the normally unused chip gullet space.

No comments yet. Start the discussion on MFGAxis.

Create Account To Reply Sign In To Reply