SEARCH THE NETWORK
START WITH WHAT YOU NEED
Manager's Desk column for June 2010 Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-06-15 CTE source: https://ctemag.com/articles/positive-restructuring-efforts/ Legacy path: /articles/positive-restructuring-efforts
END USER: Cameron International Malaysia, 65-6865-2977, www.c-a-m.com. CHALLENGE: Reduce coolant usage and rancidity. SOLUTION: A coolant recycling system that uses a continuous overflow process and ozone injection to prevent bacteria growth. SOLUTION…
END USER: HydraForce Inc., (847) 793-2300, www.hydraforce.com. CHALLENGE: Maximize reliability and flexibility when machining hydraulic manifolds. SOLUTION: Software that simulates and verifies NC toolpaths. SOLUTION PROVIDER: CGTech, (949) 753-1050, www.cgtech.com Imported from…
END USER: Hannon Electric Co., (330) 456-4728, www.hannonelectric.com. CHALLENGE: Achieving the required accuracy when machining large motor shafts held between centers on an engine lathe. SOLUTION: A re-engineered tailstock. SOLUTION PROVIDER: Riten…
Using the design of experiments process for QC on the shop floor. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-06-15 CTE source: https://ctemag.com/articles/experimental-machining/ Legacy path:…
Appropriate scenarios for applying a reamer when finishing holes. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-06-15 CTE source: https://ctemag.com/articles/getting-reaming-right/ Legacy path: /articles/getting-reaming-right
Texas shop's waterjet cutting capabilities help protect U.S. soldiers. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-06-15 CTE source: https://ctemag.com/articles/max/ Legacy path: /articles/max
The development of large diamond wheels for machining large parts. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-06-15 CTE source: https://ctemag.com/articles/grinding-large/ Legacy path: /articles/grinding-large
Superabrasive tools can be applied to efficiently machine carbon fiber-reinforced plastics. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-06-15 CTE source: https://ctemag.com/articles/high-fiber-diet/ Legacy path: /articles/high-fiber-diet
END USER: The M.K. Morse Co., (800) 733-3377, www.mkmorse.com. CHALLENGE: Eliminate dirt and debris from machine coolant when grinding cermet-tipped saw blades. SOLUTION: Filtration system capable of removing particles to 1μm. SOLUTION…
END USER: North America Clutch Corp., (414) 267-4000, www.noram-clutch.com. CHALLENGE: Lower manufacturing costs. SOLUTION: An automated turning center. SOLUTION PROVIDERS: Amada Machine Tools America Inc., (847) 797-8700, www.amadamt.com; Progressive Machinery Inc., (414)…
END USER: Prospect Mold Inc., (330) 929-3311, prospectmold.com. CHALLENGE: Reduce the time needed to cut grooves in a large mold. SOLUTION: Replace EDMing with endmilling. SOLUTION PROVIDER: OSG Tap & Die Inc.,…
Machinist's Corner column for the May 2010 issue of Cutting Tool Engineering. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/leave-it-better-you-found-it/ Legacy path:…
Get with the Program column for the May 2010 issue of Cutting Tool Engineering. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/cadcam-belongs-shop-floor/…
Part Time column for the May 2010 issue of Cutting Tool Engineering. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/finessing-fins/ Legacy path:…
Shop Operations column for the May 2010 issue of Cutting Tool Engineering. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/brain-food-metalworking-shop/ Legacy path:…
Machine Technology column for the May 2010 issue of Cutting Tool Engineering. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/toolholder-and-tool-balance/ Legacy path:…
Manager's Desk column for the May 2010 issue of Cutting Tool Engineering. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/fastest-way-new-business/ Legacy path:…
Is your shop like a clean room? It could be. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/air-force/ Legacy path: /articles/air-force
Insert geometries for effectively turning high-temperature superalloys. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/turning-nasty/ Legacy path: /articles/turning-nasty
Advanced vertical machining centers provide performance and value. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/not-your-fathers-vmc/ Legacy path: /articles/not-your-fathers-vmc
A long boring tool can cause vibration, so deep holes can be deep trouble. But several strategies can minimize vibration. Imported from the CTE archive to seed discussion on MFGAxis. Originally published…
Pristine finishes are pivotal for safe and effective orthopedic implants. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-05-15 CTE source: https://ctemag.com/articles/surface-finesse/ Legacy path: /articles/surface-finesse
Shop Operations column for April 2010 Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-04-15 CTE source: https://ctemag.com/articles/thursday-night-specials/ Legacy path: /articles/thursday-night-specials
Machine Technology column for April 2010 Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-04-15 CTE source: https://ctemag.com/articles/limit-bending-moment/ Legacy path: /articles/limit-bending-moment