Loading when grinding cermets
Ask the Grinding Doc column by Dr. Jeffrey Badger for April 2010 Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-04-15 CTE…
General Manufacturing Discussion
Recent discussions
Time management for the boss
Manager's Desk column by Keith Jennings for April 2010 issue of Cutting Tool Engineering. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-04-15 CTE source: https://ctemag.com/articles/time-management-boss/…
Enterprising solution: General Industry Coverage
END USER: Sunrise Machine & Tool Inc., (800) 725-7761, www.sunrise-smt.com. CHALLENGE: Improve production control. SOLUTION: Enterprise resource planning software. SOLUTION PROVIDER: MIE Solutions Inc., (714) 786-6230, www.mie-solutions.com Imported from the CTE archive…
High performance in a small package
END USER: Precision Technologies Inc., (978) 649-8715, www.precision-techno.com. CHALLENGE: Boost feed rate when milling tiny slots. SOLUTION: Variable-helix miniature endmill. SOLUTION PROVIDERS: Harvey Tool Co. LLC, (800) 645-5609, www.harveytool.com. Imported from the…
A world class act: General Industry Coverage
END USER: Specialty Saw Inc., (860) 658-4419, www.specialtysaw.com; CHALLENGE: Increase the size of the saws it manufactures and resharpens while reducing turnaround time. SOLUTION: Two saw grinding machines. SOLUTION PROVIDER: Vollmer of…
Swiss Army Knife: Turning Performance
Swiss-style turning can be complicated, so it helps to have an operator's 'tool kit' with multiple solutions. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-04-15…
Breaking the beam: Tool Presetting
The benefits of performing tool breakage detection with a noncontact, laser-mounted monitoring system. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-04-15 CTE source: https://ctemag.com/articles/breaking-beam/ Legacy…
Robots done right: Inspection Efficiency
Can robots improve your deburring operation? Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-04-15 CTE source: https://ctemag.com/articles/robots-done-right/ Legacy path: /articles/robots-done-right
Competitive technology: General Industry Coverage
Every segment of manufacturing faces unique challenges. Tool and die makers, however, seem to endure an outsized number of challenges. Imported from the CTE archive to seed discussion on MFGAxis. Originally published…
Park Precision Adopts Zero-Point Clamping for Faster Setup
Part manufacturers are examining every aspect of the production process, from cutting tool parameters to workholding methods, to find ways to reduce costs and improve quality. Conversations with metalworking professionals have revealed…
One size doesn't fit all
Machinist's Corner column for March 2010 issue of Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/one-size-doesnt-fit-all/ Legacy path:…
Changing CAM software: General Industry Coverage
Get With The Program column for March 2010 issue of Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/changing-cam-software/…
Made in America: repeatable precision
Part Time column for March 2010 issue of Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/made-america-repeatable-precision/ Legacy path:…
Developing a personal learning attitude
Shop Operations column for March 2010 issue of Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/developing-personal-learning-attitude/ Legacy path:…
Setting tool length
Machine Technology column for March 2010 issue of Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/setting-tool-length/ Legacy path:…
Efficient office space improves shop
Manager's Desk column from March 2010 Cutting Tool Engineering magazine. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/efficient-office-space-improves-shop/ Legacy path: /articles/efficient-office-space-improves-shop
On the cutting edge of measurement
END USER: BH Tool, (801) 908-0707, www.bh-tool.com. CHALLENGE: Ensure gaging accuracy. SOLUTION: An edge-finding gage. SOLUTION PROVIDER: Haimer USA LLC, (866) 837-3265, www.haimer-usa.com Imported from the CTE archive to seed discussion on…
No monkeying around: Drilling Performance
END USER: D&G Precision Manufacturing Inc., (920) 477-3609, www.dgmfg.com. CHALLENGE: Decrease cycle times when milling aluminum forgings. SOLUTION: Two-flute solid-carbide endmills. SOLUTION PROVIDER: Gorilla Tools, (866) 888-9600, www.gorillamill.net Imported from the CTE…
Easier roughing: General Industry Coverage
END USER: Bolton Aerospace Inc., (860) 649-2727. CHALLENGE: Reduce rough machining time. SOLUTION: A combination of high-performance, solid-carbide endmills. SOLUTION PROVIDERS: JJ Industries of Connecticut Inc., (800) 382-0012, www.jjind.com Imported from the…
Beyond the ROI calculation: Turning Performance
A rational approach to machine tool selection. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/beyond-roi-calculation/ Legacy path: /articles/beyond-roi-calculation
Sharp focus: General Industry Coverage
Should you outsource tool sharpening or do it in-house? Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/sharp-focus/ Legacy path: /articles/sharp-focus
Intersection ahead: Drilling Performance
Tools for finishing intersecting holes. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/intersection-ahead/ Legacy path: /articles/intersection-ahead
Monster machines
Applications, accuracy issues and infrastructure requirements for large-part machine tools. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/monster-machines/ Legacy path: /articles/monster-machines
Custom connection: Drilling Performance
Custom tools help aerospace part makers meet demanding specs. Imported from the CTE archive to seed discussion on MFGAxis. Originally published on CTE: 2010-03-15 CTE source: https://ctemag.com/articles/custom-connection/ Legacy path: /articles/custom-connection
Drag way cutting: 5-Axis Machining
END USER: Bill Miller Engineering Ltd., (775) 887-1299, www.bmeltd.com. CHALLENGE: Boost production with upgraded tooling. SOLUTION: A high-speed solid-carbide drill and a tool- holding system. SOLUTION PROVIDER: Sandvik Coromant Co., www.sandvik.coromant.com/us, (800)…